How to Enable COM Ports on Windows 10 or 11 and Use Prolific PL2303 USB to Serial CableClick to Watch Video

Please install corresponding PL2303 driver to support Windows 11 and further OS


Check in the Device Manager, normally the Drivers are corrupt, reinstall the PL2303 USB-to-Serial Driver. This should be resolved.
     The error shows " Please install corresponding PL2303 driver to support Windows 11 and further OS.
    1. Click on update Drivers, choose "Browse a Location" then point it to where the driver is.
    Solution: Or Download pl2303 driver for Windows 11 and install them. Update your Windows Machine and normally this resolves the issue.


Please install corresponding PL2303 driver to support Windows 11 and further OS

Edited Version 2

Check in the Device Manager, normally the Drivers are corrupt, reinstall the PL2303 USB-to-Serial Driver. This should be resolved.
     The error shows " Please install corresponding PL2303 driver to support Windows 11 and further OS.
    1. Click on update Drivers, choose "Browse a Location" then point it to where the driver is.
    Solution
Or Download pl2303 driver for Windows 11 and install them. Update your Windows Machine and normally this resolves the issue.

Please install corresponding PL2303 driver to support Windows 11 and further OS

Edited Version 3

 In my case, I found that I had installed a PL2303 USB-to-Serial Driver on my machine. This conflicted with installing the PL23XX USB-to-Serial Driver. If you have Windows 11, make sure you only have one Prolific Technology USB to Serial installed and test that way. Remove one, test to see if the error goes, if not remove one and install the PL23XX USB-to-Serial Driver, restart your computer, and test. Good luck!

Servers
published
v.0.01



Jack said:

In my case, I found that I had installed a PL2303 USB-to-Serial Driver on my machine. This conflicted with installing the PL023XX USB-to-Serial Driver. If you have Windows 11, make sure you only have one Prolific Technology USB to Serial installed and test that way. Remove one, test to see if the error goes, if not remove one and install the PL23XX USB-to-Serial Driver, restart your computer, and test. Good luck!

Posted On: December 20, 2021 13:47:36 PM
Vinny said:

Another way to resolve this error is by clicking on the COM Port with corrupted drivers, click "Uninstall Driver" from the Device Manager on Windows. Then click on "Monitor thumbnail" that says "Scan for hardware changes". This should install the drivers automatically.

Posted On: December 17, 2021 22:08:28 PM


For peering opportunity Autonomouse System Number: AS401345 Custom Software Development at ErnesTech Email AddressContact: [email protected]