D1 Mini SP32 Development Board and BTF LED Lights on one LED works


Question: Why is D1 Mini SP32 Development Board and BTF LED Lights on one LED works?

Login to See the Rest of the Answer

Answer: There is a chance that your D1 Mini Board was not sodared correctly. If the GRD pin is not well sodared on
               the PCB Board, only one led will work because there is no too much power to go through all LEDs.


D1 Mini SP32 Development Board and BTF LED Lights on one LED works

Edited Version 2
Yes, it is possible to connect a D1 Mini SP32 development board with BTF LED lights on one LED. The D1 Mini SP32 is a microcontroller board that can be programmed using the Arduino IDE or other compatible software. It has multiple digital and analog input/output pins that can be used to control external devices such as LED lights. To connect the BTF LED lights on one LED, you will need to use a resistor in series with each LED to limit the current flow. The value of the resistor will depend on the specific LED and the microcontroller pin being used. You can refer to the datasheet for the LED and the microcontroller for more information on how to connect them safely. Once you have connected the LED lights, you can use the Arduino IDE or other compatible software to program the microcontroller to turn the LEDs on and off as needed. The specific code will depend on your project requirements and the type of LED lights being used.




For peering opportunity Autonomouse System Number: AS401345 Custom Software Development at ErnesTech Email AddressContact: [email protected]