How to Re-Install Esp-Home to your Muse Luxe (Hackable Speaker)

1. Find a Data USB Cable
    => Make sure this cable is a Data Cable otherwise you will not connect to the Speaker
2. Make sure the Speaker is off
   => Connect the USB cable from the speaker to the computer
3. Navigate to :
                   https://web.esphome.io/?dashboard_wizard
   =>Before you hit connect:
        3. 1. Make sure you turn on the Speaker
        3. 2. Find a small pin or wire that can be inserted into the AUX port
               => There is a button inside that allows you to set the Speaker in a
                      debug mode.
                      => When the button is placed using a narrow pin
                             [Important]: Then go ahead select the Serial Port shown in the pop-up window in step 3
                                                  then hit "Connect" without letting go of the button pressed with a pin.
                                                  => Once your computer/Browser connects to the Speaker, unpress the button inside the Aux hole
       3. 3. Click "Prepare for First Use" if you have never installed ESP-Home on the speaker
               => If it does not connect, press the button inside the Aux hole again, the connection should now be established the 
                     the firmworkd should be flushed the speaker.
    4. Adding Speaker in Home Assistant
        4.1. After the base firmwork is flushed onto th Speaker, nagivate to your local HomeAssistant instance.
               => Go to ESPHome Device Compiler in your HomeAssistant instance
               => Click Add Device
               => Click "Plug into this computer" this will prepare the bin file and then you will need to download it.
                => Follow step 2 shown on the popup window.
                        => Make sure no other serial connection is active. Remember in step 3. Make sure the window is closed 
                              [Important]: Serial Communication only allows one connection at a time.
                       => Once you download bin file, go to the same website in step 3 and install the bin file.


Good Luck!
Dont forget to set the wifi in the YAML file